
MLB-E4102-5-F
Features
- IEEE 802.3x flow control & back-pressure
- 9K jumbo frames
- L2 wire-speed switching engine
- 2K MAC forwarding addresses
- Queues per port: 4
- Supports 802.1p & TOS/DS QoS
- Multicast/Broadcast/Flooding Storm Control
- Fanless & wide operating temperature range (-40~+75°C)
- Dual power input (12~58VDC) & reverse power protection
- Hi-POT 1.5 KV
- IP30
- DIN-rail and wall mounting option
Detail
5-Port Ethernet Switch series provides different combination in Gigabit/Fast Ethernet and fiber connections for optional. It fulfills the needs of the rapid growth of communication traffic in the industrial network. MLB series is designed for supporting standard industrial applications without complex setup to make the network truly plug-and-play.
Specs
Ethernet | |
Operating Mode |
Store and forward L2 wire-speed/non-blocking switching engine |
MAC Addresses | 2K (Gigabit Ethernet)/1K (Fast Ethernet) |
Jumbo Frames | 9K Bytes |
Copper RJ45 Ports |
Fast Ethernet Switch: 10/100M Copper ports speed auto-negotiation; MDI/MDIX auto-crossover |
Ethernet Isolation | 1500 VRMS 1 minute |
Ethernet Port Indication | Link & Speed |
Environmental & Compliances | |
Operating Temperature Range | -40~+75°C (cold startup at -40°C) |
Storage Temperature Range |
-40~+85 °C |
Humidity | 5~95% (non-condensing) |
Vibration, Shock & Freefall |
Vibration: IEC60068-2-6 Shock: IEC60068-2-27 Freefall: IEC60068-2-32 |
Certification Compliance | CE/FCC/UL-508; EN-50121-4 |
Electrical Safety | UL508/CSA C22, EN61010-1, CE |
SFP Ports |
Gigabit Ethernet Fiber Switch: 100/1000 base SFP slot Fast Ethernet Fiber Switch: 100 Base SFP slot |
Fiber Port Connector | LC typically for fiber (depends on module) |
Flow Control | IEEE 802.3x (full duplex) and back-pressure (half duplex) |
Fault Contact | Power alarm relay output (MLB-E4101-5) |
QoS | IEEE 802.1p |
Number of Queues | 4 |
Traffic Shaper | Port-based port shaping |
Storm Control |
Multicast/Broadcast/Flooding Storm Control per system basis enable/disable |
Power | |
Power Input | Redundant input terminals; reverse power protection |
Input Voltage Range | 12~58VDC |
Indicators | |
Power Status Indication | Indication of power input status |
EMC |
FCC Part 15, CISPR 22 (EN55022) class A IEC61000-4-2, -3, -4, -5, -6 (level 3) |
RoHS and WEEE | RoHS (Pb free) and WEEE compliant |
MTBF | > 25 years |
Mechanical | |
Ingress Protection | IP30 |
Installation Option |
DIN-rail mounting Wall mounting |
LLDP |
IEEE 802.1ab Link Layer Discovery Protocol (LLDP) |
Dimension |
112.2x28.1x89.4mm (without DIN rail clip) |
Weight | 295g |

top